Product Details
- Description
-
- Commodity name: Double head servo capping machine, XG100-2
II Equipment Performance Description and Characteristics
1. The diameter of the screw cap is between 30 and 100mm, the thickness of the screw cap is between 8 and 60mm, the diameter of the bottle is between 40-130mm, and the height of the bottle is between 80-350mm;
2. Suitable for hard round lids with obvious center of gravity distribution, with a hopper capacity of 225L;
3. The production efficiency can be adjusted, with a maximum of 45 cans per minute;
4. The overall appearance material is mainly made of stainless steel 304 material, with a thickness of 1.2mm;
5. The organic glass material adopts imported acrylic, with a thickness of 8-10mm, high-end and atmospheric;
6. The clamp is embedded with PP glue, which has a wide range of applicability and will not cause damage to the lid;
7. There is a missing cover alarm prompt with a cover function to ensure efficient and uninterrupted operation of the equipment;
8. The downtime due to missing covers can be adjusted to ensure efficient and uninterrupted operation of the equipment, effectively reducing equipment failures;
9. Changing the caliber requires changing the mold, which takes about 90 minutes;
10. For the same caliber, to change the height of the bottle cap, simply manually adjust the height with a screw;
11. The defect rate is extremely low, with plastic bottles below 0.5%, glass cans below 0.5%, and iron cans below 0.5%;
12. Configure a conveyor belt with a length of 3 meters, a height of 0.9 meters, and a chain width of 134mm;
13. The total dimensions of the equipment are 3 meters in length, 1.05 meters in width, and 2.3 meters in height. After packing, the dimensions are 1.95 meters in width, 1.20 meters in height, and 1.94 meters in height for the capping machine and 2.50 meters in width, 0.85 meters in height, and 1.60 meters in height for the lifting machine;
14. The net weight is about 500KG, and the gross weight is about 650KG;
15. The conveyor belt motor has a power of 0.2KW/220V, the stepper motor has a power of 1.5KW/220V, the screw cap motor has a power of 1.5KW/220V, the hoist motor has a power of 0.2KW/220V, and the total power is 3.4KW
16. The conveyor belt is made of nylon POM material, and the chuck is made of PP board material;
17. This machine requires an additional air compressor, with a minimum air source pressure requirement of 0.6MPa and a gas consumption of 0.5m ³ per minute;
The electrical configuration of equipment III is shown in the table below (there may be slight adjustments based on inventory and delivery time, but the same brand and model will be selected):Legend Name Quantity Brand/Country Legend Name Quantity Brand/Country 
Photoelectric sensor 3个
Otto Knicks/Korea 
(Program) Controller 1个
Mitsubishi/Japan 
proximity sensor 1个
Otto Knicks/Korea 
touch screen 1个
Siemens/Germany 
indicator light 2个
Schneider/France 
conveyor belt motor 2个
Weite Micro/Beijing, China 
cylinder 9个
Yadeke/Taiwan 
servo motor 2个
Shenzhen Research and Control 
AC contactor 1个
Chint/Zhejiang, China 
stepper motor 1个
Shenzhen Research and Control 
Timing belt 2条
Qingchuan/Guangzhou 
Gear reduction motor 1个
Mordor/Dongguan 
solenoid valve 12个
Yadeke/Taiwan 
switching power supply 1个
Mingwei/Taiwan 
triple set 2个
Yadeke/Taiwan 
Magnetic sensor 4个
Yadeke/Taiwan 
intermediate relay 16个
Schneider/France 
Emergency stop button 1个
Schneider/France IV Random List of Vulnerable Parts
1. 10 silicone caps for bottle clamping; 2. Approximately 5 conveyor belt chains; 3. 2 synchronous belts; 4. 5 hoist chain pieces;
V Random Tool List
1. A set of standard hexagonal keys; 2. 1 open-end wrench each for 17 and 19; 3. 1 manual, 4 photoelectric screwdrivers
VI available spare parts for purchase
1. Collet 2, turntable 3, clamp 4, synchronous belt 5, three jaw cylinder 6, elevator chain piece; 7. Motor
VII Warranty Period
Within one year after the delivery of the equipment, free on-site maintenance service for quality problems (only in Chinese Mainland) is provided. The warranty period of spare parts is as follows:
1. One year free warranty for core components (complete set of screw cap mechanism, synchronous pulley);
2. One year free warranty for the motor;
3.PLC、 One year free warranty for solenoid valves, relays, cylinders, photoelectric switches, proximity switches, touch screens, and pneumatic triplets;
4. One year free warranty for synchronous belts;
Belongs to category:
File Download
Factory Showcase
Our advantages
A high-tech enterprise that integrates research and development, manufacturing, sales, and after-sales service.
We have developed and produced over 20 series and more than 50 varieties, with outstanding performance, leading technology, easy operation, easy maintenance, safety, and durability.
Widely used in various fields such as puffed food, snack food, frozen food, agricultural and sideline products, medicine, chemical products, hardware products, etc., it meets the needs of customers.
The company passed the IS09001:2000 international quality management system certification in 2004, providing a strong guarantee for the quality and service of the company's products. In order to ensure the smooth export of the products to the European Union, the company also passed the product CE safety certification in the same year.
Certification Of Quality
Product Consultation
Double head servo capping machine, XG100-2
Summary Description:
Share to:
Keywords: